Shanks

#8 Shank Available In: Malleable Iron Only	#25 Shank Available In: White, Brown, Copper, and Galvanized	#30 Shank Available In: White, Brown, Copper, and Galvanized

Shank Drives  

#6 Drive Available In : White, Brown and Copper	#6 Drive Available In: White, Brown and Copper	#6 Drive Available In: White, Brown and Copper

Rack Key

Instruction For Assemble:

1. Position rack over downspout seam.  Drill and pop rivet 4 hole to secure rack.  Use existing hole to guide and drill through downspout for 1/8 pop rivet and repeat with each hole.  Pop rivets must be same metal as products fastened.  Copper and Galvanized may be soldered.

2. Insert drive into any grove on the rack

3. Insert key into opening formed by slot and curved edge of rack.  Force downward until taper of key locks.

Two Racks are required for 10 feet of downspout attached.

Rack	Keys	Copper Rack
Available In: White, Brown, and Galvanized only	Available In: Aluminum, Copper, Bronze only	Available In: Aluminum, Copper, Bronze only

5 & 6 Circles

5" & 6"	5" & 6"	5" & 6:	5" & 6"
Available In: Aluminum	Available In: White	Available In: Copper	Available In: Brown

Click the link to Return to the Product page  Product Guide

Questions or problems regarding this web site should be directed to a.bell@seamlessguttersupply.com.
Copyright © 2005 Seamless Gutter Supply of MD.  All rights reserved. 

Last modified 08/10/2011.